Manufactured Home Duct Cleaning Tips For A Healthier Home Environment
Air conditioner heating ducts are good breeding grounds for bacteria, mildew and mold when used for a long time without proper cleaning. It is thus important to have them cleaned from time to time especially when you see signs of dirt accumulation. The process of cleaning them may be costly particularly where the conditioners are not serviced regularly. It is wise to check your air heating ducts checked and washed regularly. The following are some manufactured home duct cleaning tips that you may consider.
Signs your that your air heating require cleaning
1) Dust in the registers: There may be debris in your ductwork if there is dust being blown by the air conditioner registers. Accumulation of dust in your registers or directional fins means there are contaminants in your ducts that need thorough cleaning. You can remove a length of ducts in one of your register to confirm whether there is any visible mold growth or debris.
2) Increase in utility bill: This increase is mainly caused by particles that may be blocking your ducts. Clogged ducts impede airflow and force your conditioner to work harder when circulating hot or cool air through the house. This may lead to a sudden rise in the amount of energy implying that the ducts need to be cleaned.
3) Moisture in your registers: Mold growth and dust will trap moisture from the air getting that causes more mold growth. You should clean your duct if it becomes damp or drips while running. This may be due to a clogged air conditioner filter.
4) Rodents or insects: you should contact professional duct cleaners if you think there are rodents or insects that make funny noise in your ducts. These small animals are able to get in and they can chew the existing structures to get way into the ventilation system. They often leave food particles and waste behind or even die within the piping.
5) Odors: An odor from your air heating ducts is a good sign of potential mildew and mold growth. Mildew and mold growth can be a serious problem which may even be hazardous to the health of the people living in your house. You should treat any musty odor from your registers as a mold problem and hence clean the ducts thoroughly.
Tools needed to clean air heating ducts
1) Duct brushes: Ventilation duct cleaning process require long-handled and very stiff duct brushes. They agitate debris and dust to suck them up into a vacuum or wipe a them way. Some are operated manually while others are power brushes that rotate inside the ducts.
2) Duct vacuums: They fit over the ducts opening to create a negative air flow and prevent contaminants from entering your home. Others have a long hose that push through sharp turns and duct’s coils when cleaning.
3) Pressure washers: They are used for deep-duct-cleaning to remove toxic contaminates in the ventilation ducts.
4) Ladder: It should be sturdy and well put together to avoid accidents when cleaning.
5) Air compressors: They throw blows and blasts of compressed air to make cleaning easier on the other end where agitation devices such as brushes may be used to scrub the debris attached to the inner walls of the duct.
Somce Cleaning Instructions
1) Remove all return and supply registers from the walls to access the duct system.
2) Power your vacuum up and attach the extra hoses to attain its longest length. Vacuum the ducts right from the holes where the registers were attached all the way to reach the vacuum cleaner as far as you can.
3) Measure how long the hose has reached away from the register and look for an access to panel in your duct to snip at that point to vacuum farther down the truck.
4) Keep cutting access panels while vacuuming until all the ducts are cleaned out all the way to the furnace.
5) Cut metal sheet patches and use them to cover the access holes and screw them to the ductwork using metal screws.
6) Screw the supply before returning the registers onto the walls.
7) Vacuum the registers to remove any debris.
8) Remove the ceiling vent covers by unscrewing the connections. You will be able to lift up the vent after opening to carry it away to area where you can clean it comfortably.
9) Use soapy water in a bowl and a wire cloth or sponge to scrap it thoroughly removing all dust and debris.
10) Replace the vent onto the floor and fasten the screws.
Rhode_Island, Hermosa Beach, Coffeyville, Wheeling, Moore, State College, Chicago Heights, Murray, Newton, Utah, Emmaus, DeSoto, Tucson, Benton, Westwood, Central Falls, Southlake, Winnetka, Mamaroneck, Lebanon, Nevada, New Jersey, Riverview, Newport News, Daly City, North Little Rock, Vermilion, Broomfield, Rocklin, Central Point, Rancho Cucamonga, Ardmore, Coronado, Cliffside Park, East Wenatchee, Lubbock, Wilmington, Shoreview, Euclid, St. Cloud, Lincoln Park, Glens Falls, Valley Stream, Vermont, Ridgefield Park, New Albany, Pennsylvania, Chino, Lowell, Myrtle Beach, Buffalo, Brainerd, Depew, Franklin, Kansas City, Burlington, Rock Island, River Forest, Oregon, Florida, Huntersville, Glen Ellyn, Merced, Englewood, El Dorado, Cadillac, White Settlement, Union City, Washington, Eloy, Tennessee, Kansas